Spa Heating

 

Please confirm the padlock is removed from the propane tank valve and the valve handle is parallel to  the valve. please also snap a photo of the gauge which shows the available propane expressed as a percentage of the tank. and email it to cphgsales@gmail.com.  If the valve is locked, please call the management Company for an unlock code.

Press Button for service mode and confirm auto is not illuminated, (see control board picture below)

 

 

Press Button for spa mode,  (see control board picture below)

 

 

Press Button for filter, (see control board picture below)

 

 

Press Button for spa pump. (see control board picture below)

 

 

 

Turn on the Pool/Spa Heater directly at the heater. The heater is an oval looking device that says STA-Rite and is to the left of all the pool equipment when your facing the equipment.

 

 

 

When finished

 

1. Turn off Heater

2. Turn off Spa Pump

3.  Press Button to change from Spa mode to Pool Mode

4. Confirm Filter Pump is still ON by checking for the illuminated light next to filter